Commodity Products Co., Inc.

Door Hardware
Ridge Vents
Gravity Ventilators
Roof Curbs
Wall Louvers
Roof Access Hatches
Exhaust Fans
Specialty Items


Ridge Vents

For Low-Profile Ridge Vents

Click Here

...used on metal roofing systems roofs conforming to the high standards and specifications which have been developed, tested and proven over many years. They provide an excellent value for the user.


Standard Sizes Bird Screen
9" throat and 12" throat - 10 foot sections. Other sizes available upon request. Low profile design can be used for single unit or continuous run installation with no disassembly. Fully protected by 4X4 galvanized mesh hardware cloth.


Integral Dampers Construction
Easy-moving damper opens to any degree from fully open to completely closed. Durable 26 gauge exterior combined with internal components of 24, 20 and 18 gauge die formed sheet metal and machined parts for longer service life.
Design Finish
Aerodynamically proportioned to exclude weather - protects air passages and full outlet area. Pre-painted or galvalume is standard. Other materials and finishes available upon request

Drainage Area

                                                                  Continuous slot - bottom of both sides of windbands


     Ridge ventilators manufactured by Metallic Products Corporation are in accordance with highest design requirements and specifications. 25 plus years of experience in furnishing stationary, gravity-flow, continuous ridge ventilators has proven their efficient performance and lasting quality.

     A properly engineered ventilation system using continuous    ridge ventilators will control the movement of fresh air through     the building removing hot, stale air and air contaminated by manufacturing or production processes. Summer heat is released naturally through gravity ridge ventilators. During winter, proper ventilation can assist in the control of condensation and other

moisture problems, such as rust and deterioration of insulation or the damage to stored products.

     The Metallic Products Corporation's ridge ventilator is a low-profile design manufactured in 10 foot lengths which can be installed as individual units or in a continuous runs. Vents may be furnished with or without dampers to control the flow of air. Operation of dampers is standard by pull chains )Please specify when ordering), multiple damper operation is available for up to 5 or more units. 

Ventilators are shipped with a 1:12 end cap and can be field modified to accommodate up to a 6:12 roof pitch.


For Drawings and Specifications

Click Here


Commodity Products Co., Inc.
206 Chantilly Drive
West Monroe, LA 71291
Phone: 800-284-9016
Fax: 318-397-1089


Doors/Frames | Windows | Door Hardware | Canopies | Ridge Vents | Gravity Ventilators | Roof Curbs | Wall Louvers | Roof Hatches | Exhaust Fans | Cupolas | Specialty Items