| ...used on all types
of metal roofing systems and conforms to our highest standards
and specifications which have been developed, tested and
proven over many years.
|Rugged, 16 gauge 55% aluminum-zinc coated sheet
meets ASTM A792-89. Corners are mitered and welded water tight
using a siliconized bronze wire for a long lasting and
non-corrosive finish. Welds are finished with a protective
zinc-primer. FSK faced rigid board insulation is optional.
||Curbs are supplied with a 55%
aluminum-zinc finish and can be factory painted to match
almost any color.
|Curbs are made to match any roof slope and can
be either peak or hillside mounted. Curb corrugations match
virtually any available roof configuration and can be factory
welded into curb skirts or shipped loose for field
installation. "R" panel configurations can be
die-formed directly into curb skirts to reduce the amount of
welding and the possibility of water penetration.
Hillside mounted curbs have a water
diverting angle to deflect water around the unit. A cricket
can be substituted for the diverter angle if desired. Hillside
mounted curbs can be constructed utilizing a two-piece design
with a separate under-panel diverter to achieve shingling
effect without the need to cut into roof panels.
|When ordering, please
indicate size, roof panel type, whether or not insulated and
|Commodity Products Co., Inc.
206 Chantilly Drive
West Monroe, LA 71291
Windows | Door Hardware | Canopies | Ridge Vents | Gravity
Ventilators | Roof Curbs | Wall Louvers | Roof Hatches | Exhaust
Fans | Cupolas | Specialty Items