Commodity Products Co., Inc.
     Home

 
       
Doors/Frames
Windows
Door Hardware
Canopies
Ridge Vents
Gravity Ventilators
Roof Curbs
Wall Louvers
Roof Access Hatches
Exhaust Fans
Cupolas
Specialty Items

 


Wall Louvers



Frame Blades
18 gauge galvanized steel 20 gauge roll-formed galvanized steel
Benefits For Adjustable Louvers
Louvers are self mulling. Louvers are self-flashing and self-framing. No other trim required. Before painting, louvers are steam-cleaned and treated. Louvers can be painted to match pre-selected colors by manufacturing Standard paint is an electro-statically applied polyester paint, 2mil thick oven baked finish                                                                        After the paint process is completed, an extruded weather stripping is applied to the edge of each blade to ensure virtual air tightness in the closed position.
Insect Screen
Blade Operators 18/16 aluminum mesh installed in an extruded removeable, re-wireable aluminum frame.
Twin link brackets, plated steel, assembled with double brass pivot and set screw. Connecting Rod
Operator   1/4" zinc plated steel                                  
Standard operator is by a reinforced cast aluminum hand crank. Optional chain operator of #35 sash chain, with plastic-coated chain pull handle.

 

Wall Louvers

 

Features Continued

     Wall Louvers as manufactured are specifically designed for pre-engineered metal building wall panels. Both fixed and operable models are available. Louvers are self-flashing requiring no additional flashing to complete installation in standard "R" and "A" type wall panels. Additionally, the frame design allows the louvers to be installed individually, one above the other or side by side, without the need for additional mullions or frames.

Construction Features

Modular Louvers are constructed of 18 gauge frames and 20 gauge blades, G90 galvanized steel. Frame construction enables easy installation of single or multiple units interconnected. The self-flashing frame is designed specifically for either "R" or "A" type flanges. Please specify panel type when ordering. The frame has a recessed head to accept the wall panel and side flanges fit specified panel profile on 1' modules. The sill is tapered to provide drainage and exclude moisture. Flat flange louvers are also available for installation into framed openings. (Note: Self-flashing louvers can be made to fit framed openings if specified when ordering.) All welds are water tight and made from non-corroding siliconized bronze wire and finished after fabrication. 

     Fixed louvers feature 45* roll-formed blades, with 4" depth and riveted to louver frame for security. Fixed louvers have 55% free area. Adjustable louvers feature roll-formed blades with plated twin link pivot brackets riveted to blade and connected with 1/4" zinc plated rod and assembled with brass pivot and set screw for smooth, non-corrosive, long lasting operation. Standard operator is by reinforced cast aluminum hand crank. Louver can be factory or field modified for chain operation.

 Motorized operators are available. Blade edge seals are installed for maximum air sealing. Adjustable louvers have 77% free area.

 

   

For Drawings and Specificationss

Click Here


Commodity Products Co., Inc.
206 Chantilly Drive
West Monroe, LA 71291
Phone: 800-284-9016
Fax: 318-397-1089
E-mail: commodity@comcast.net

 

Doors/Frames | Windows | Door Hardware | Canopies | Ridge Vents | Gravity Ventilators | Roof Curbs | Wall Louvers | Roof Hatches | Exhaust Fans | Cupolas | Specialty Items